Accuride Home Page

BSRA Home » Rules and Regulations

Download Rules and Regulations (PDF)


Sander Requirements

  • All sanders must run on standard 110v power.
  • All sanders must use an unmodified factory manufactured (Stock) sanding belt (sanding grit is not called out).
  • Sanders can not be more than 24" in length.
  • Track guides and wheelie bars, or “outrigging” is required to keep sanders centered in the track.
  • Bob– or pig–tail (shorten) your power cord to less than 6".

 

Classes - Design Parameters

Stock Class Guidelines

  • The Belt Sander must be a standard product manufactured by a conventional power tool manufacturer.
  • No modifications or substitutions may be made to the mechanical or electrical components.
  • Non-functional decorations are allowed and encouraged—dress 'em up—be creative!

 

Modified Class Guidelines

  • Belt Sander may be altered to enhance speed and performance.
  • Belt Sander must propel itself with conventional sanding belt only.
  • Modifications and substitutions allowed to motor, drive system, electrical, etc.
  • All modifications must be carried “on-board”.
  • Decorations allowed and encouraged—dress 'em up—be creative!

 

Courses

  • All races will be run on a 12" (approx.) wide track.
  • The track is seventy–five (75) feet long.
  • The sanders race side–by–side on a drag strip track.
  • The track walls (side walls) are 3.5" above the racing floor.

 

Race Particulars

  • The BSRA shall define the number and structure of the races one hour before the event according to the number of competitors in each category.
  • False Starts: Two (2) false starts and you’re disqualified. False starts will be defined as follows:
     1. Moving across the starting line too early
     2. No power to the belt sander at the start.
  • The BSRA reserves the right to determine entry acceptance and race eligibility.
  • Each racer is responsible for the setup of their belt sander including the power cord hook up.
  • Any no-shows on a contestant's part will be a forfeiture of the race with the winner moving on.
  • The same person may enter no more than two sanders. The same shop may make multiple entries.
  • New entrees are accepted up to one hour before the event begins.
  • Pit Crews – Only 2 people per team may be in the secured track area while running their race. The pit crew is responsible for preparing for the start of the race, plugging in the sander, and removing the sander from the end of the track after the race.
  • The maximum time between races for repairs, modifications, or any other changes will be five minutes, although three (3) minutes is the preferred length of time. The judges may call for a forfeiture of the race if contestants exceed the 5–minute maximum.
  • Disputed races may be re–run at the discretion of the BSRA.
  • Awards shall be determined by the judges and the BSRA.
  • All decisions by the BSRA are final.
  • BSRA or Accuride does not sanction betting of any kind.

 

Awards

  • 1st, 2nd, and 3rd place
  • Best Design (theme)
  • Judge's Choice.

 

Consent to Use Photograph/Videotape

All registered contestants give Accuride International Inc. permission to use their name and likeness, including photographs and videotapes taken, for commercial and promotional activities without compensation.

 

Waiver of Liability

All registered contestants must agree to abide by the rules of the BSRA; enter into this tournament at their own risk; and release Accuride and its sponsors, referees, and tournament organizers from any liability.

Accuride Home Page