Woodworking & Architectural

The slides are full extension and carry loads up to 350 pounds. They may be flat mounted at a lesser load capacity of up to 150 pounds per pair. Model 7950 does not offer a disconnect method; model 7957 has a handed lever disconnect. These products have an enhanced ball retainer design, which mitigates retainer migration. Both models are available in lengths of 12" to 36" in a clear zinc finish.

Accuride International designs and manufactures RoHS-compliant precision slide products for a variety of applications in cabinetry and casework. The company has six locations worldwide with all manufacturing adhering to quality management systems registered to ISO 9001:2008. For more information, visit www.accuride.com.

# # #

Starting out on the west coast, summer races have been scheduled at E.B. Bradley Company locations in Anaheim, San Diego, and Hayward, California; Portland, Oregon; and Kent, Washington. Racers are encouraged to register right away to reserve a space in the competitions. For more information or to register for an event, visit http://www.accuride.com/BSRA/.

Competitors will vie for awards on a 75-foot wooden track complete with Christmas-tree starting signals. The sawdust is known to fly at these events and racers aggressively compete to take home a trophy for the fastest times on the track. First, second, and third place awards will be presented, as well as a special Judge’s Award. Additional circuit races will be announced as scheduled.

Accuride International is leader in the design and manufacture of precision slide products for a variety of applications. For more information, visit www.accuride.com.

Suggested applications include kitchen islands, dining or entertainment bars, or other cabinetry that benefits from two-sided access.

Offering a 100-pound load rating, Model 0363 has a detent that keeps the drawer in place at the center point of the slide travel. The slide fully extends in both directions from the center detent to give complete access to drawer contents. There is no disconnect, which ensures drawers are not unintentionally removed. This product has been tested to 80,000 cycles and is available in zinc in lengths of 16", 20", 24", and 28". It is RoHS compliant.

Accuride International manufactures precision ball bearing slides for a variety of applications and has six locations worldwide; each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit the company’s web site at www.accuride.com.

The Ascent conceals and secures screens when not in use, keeping surfaces free of clutter. To access screens, users press lightly on the top of the lift support column, which activates it to rise in less than 2 seconds.

The Ascent Lift does not require power. The smooth movement is controlled through weights, which are added to counterbalance the screen. The main support column swivels left and right 112.5º to expand viewing angles and the hole pattern provides a wide range of bracket and screen mounting options.

The Ascent Lift is quick and easy to install; the unit is simply aligned to the center of the cabinet and 8 fasteners are installed. Standard packaging includes a cable management kit and a set of weights. Additional weight packs may be purchased to accommodate lighter screens as well as optional fixed or tilt VESA brackets for kits for attaching screens or other components to the unit.

The slim and compact design makes the Ascent a multi-purpose solution for a wide range of environments such as retail stores or customer service counters and kiosks, classrooms, hospitals, business or medical offices, or conference rooms. In residential applications, the lift is a convenience and space saver throughout the home. Other uses may be found in motor homes, trailers, and mobile office trailers.

Accuride International manufactures precision ball bearing slides for a variety of applications and has six locations worldwide; each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit the company’s web site at www.accuride.com.

Coordinated by the Belt Sander Racing Association (BSRA), Accuride International, and the AWFS®Fair committee, the event will take place at 4:30 pm in the convention center’s North Hall, at booth space 925.

Competitors will vie for awards on a 75-foot wooden track complete with Christmas-tree starting signals. First, second, and third place awards will be presented, as well as a special Judge’s Award and recognition for the Best Design Theme.

“The sawdust—and sometimes sanders—really flies at these events,” says BSRA guru and Accuride Regional Sales Manager Jamie Goodwin, “We have had a tremendous turn out at our regional races over the past two years, with some fierce competition exhibited by the entrants. I imagine the racers will be pulling out the stops in order to bring home a trophy from Vegas.”

Two years ago the BSRA and the Belt Sander Races debuted at the AWFS®Fair. Well over a thousand people packed the stands to see the premier event. For those interested in competing in the race, complete rules and entry forms are available at www.accuride.com/bsra.

The AWFS®Fair in Las Vegas combines the largest exhibition of woodworking hardware and machinery, board and panel products, upholstery material, wood components, supplies, services, and new technologies in North America with networking opportunities and a professional educational conference.

Accuride International is leader in the design and manufacture of precision slide products for a variety of applications. For more information, visit www.accuride.com.

The user starts the opening and closing action and the slide does the rest. When the drawer is opened, at about the mid-point of travel the assisting forces balance, resulting in a neutral zone where the drawer remains in a steady position. Once the drawer is further extended to about two-thirds of its travel, the slide finishes the opening process. Conversely, as the drawer is pushed inward past the neutral zone, the Action-Assist™ kicks in and pulls the drawer closed.

Cabinetmakers will find the installation of this slide to be uncomplicated; it does not require electricity to operate and there are no wires or transformers. Other than minor drawer box changes, installation is very similar to a standard, side mount 3832 full extension slide.

The Action-Assist™ slide is an affordable solution for those seeking assisted drawer opening and closing. This product also supplies an upgrade that adds value to new or remodeling projects such as residential kitchens or commercial store fixtures.

There is a green aspect to this product as well. In addition to being RoHS compliant, the Action-Assist™ operates through the simple principle of stored and released energy. It does not require the use of power resources; the product’s operation is clean and renewable.

This product is ADA compliant, requiring a pull-force of only 2-3 pounds, making it a good choice for Universal Design projects. The Action-Assist™ has a 100-pound load rating and cam adjustment feature to set drawer reveals. It is available in even lengths of 12" to 28" in a clear zinc or black finish.

Accuride International is an industry leader in the design and manufacture of precision slide products for a broad range of industries.  The company has five locations; each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit the company’s web site at www.accuride.com.

Providing full extension and a 100-pound load rating in drawers up to 24" wide, the Eclipse TR (3132TR) holds drawers in a closed position until activated by touch. Pushing on the drawer front propels it open about 2 inches.

The Eclipse TR is an aesthetic choice for residential and commercial applications, because it eliminates all visible hardware—no slides on the sides of the drawer and no need for knobs or pulls. The touch release action also offers an ergonomic alternative for users who have difficulty grasping drawer pulls. This product is designed for use in portable storage pods; environments such as schools, hospitals, or laboratories; as well as cabinetry throughout the home.

Model 3132TR is compatible with inset and overlay drawer front styles. It has the same disconnect method as the other Eclipse products, which is especially intuitive for consumers. This product is RoHS compliant and available in even lengths 12 to 28 inches, plus 15" and 21" in a clear zinc finish.

Accuride manufactures precision ball bearing slides for a variety of applications and has five locations worldwide; each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit the company’s web site at www.accuride.com.

 Models AL4120 and AL4140 are lightweight aluminum, with stainless steel ball bearings and ball retainers, which provides corrosion resistance for exterior applications exposed to moisture and high humidity.

Model AL4120 offers ¾ extension and a load rating up to 966 pounds. AL4140 is full extension and carries up to 882 pounds. Both products offer smooth movement and a hole pattern that gives the flexibility to accommodate a variety of installation options. Tested to 10,000 cycles, these slides are non-disconnect for added strength, and available in lengths of 16", 20", 24", 28", 32", 36", 40", 44" and 48".

Accuride International manufactures precision ball bearing slides for a variety of applications and has six locations worldwide; each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit the company’s web site at www.accuride.com.

The corrosion resistance of these products offers a slide solution for drawers or pull-out shelves in outdoor kitchens, poolside structures, greenhouses, garages, sheds and barns, marine cabinetry, and other applications subject to dampness.

Tested to 80,000 cycles, these products offer load ratings from 100 to 350 pounds, with extensions ranging from 3/4 to over travel. All include a hold-in detent feature to prevent drawers from rolling back out after closure. Several lengths are available for each model and all products are RoHS compliant.

Accuride International manufactures precision ball bearing slides for a variety of applications and has six locations worldwide; each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit the company’s web site at www.accuride.com.

Santa Fe Springs, CA-Accuride introduces the 3832 Easy-Close (EC), a 100-pound, full extension, side mount slide designed to bring drawers to a smooth, gentle close.

The 3832EC enhances installations requiring safe and quiet operation. In commercial or institutional settings, it is well suited to cabinetry and casework found in libraries, schoolrooms, laboratories or hospitals, and high-end retail stores. In residential applications, the quiet performance is valued in nearly every part of the home, especially in a child’s room or baby’s nursery.

The easy-close action on this product has an automatic reset and begins about 1.75" from drawer closure. This increased distance, or stroke, helps to prevent pinched fingers. The pull-force required to open the drawer is less than that typically found on slides with a soft close feature. This was engineered with the end user in mind to provide a balance between the closing and opening actions, thus preventing the drawer from pulling out of the user’s hand and unintentionally re-closing.

The 3832EC has a lever disconnect and Accuride’s signature cam drawer front adjustment. The easy-close mechanism is partially shielded, which prevents debris from entering during cabinet construction. This product is available in even lengths of 14" to 28", in clear zinc, black, and white finishes. The zinc and white finishes are RoHS compliant.

Accuride International manufactures precision ball bearing slides for a variety of applications and has six locations worldwide; each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit the company’s web site at www.accuride.com.

One of the more notable additions is an interactive Slide Selection Guide that simplifies the product selection process. EGO Factory in Irvine, California worked with Accuride to develop the site to effectively communicate detailed information about the company’s ever-growing line of precision slide products. 

The site features technical information and hardware products for the Woodworking/Architectural and Industrial/Electromechanical markets. The Woodworking and Architectural section is focused towards woodworkers who design and build wood cabinetry, casework, and furniture. It also includes helpful information specific to architects, designers, and specifiers. The Industrial and Electromechanical section reaches out to an extended range of industries with custom and off-the-shelf solutions for applications such as major appliances, automotive/vehicular, machinery, and electronic enclosures.

Visitors may download technical sheets, CAD files, literature, and reference charts to assist in product and accessory kit selection. Authorized distributors are easily located by ZIP/postal code or state/province.

Accuride International Inc. designs and manufactures precision slide products for a broad range of industries and applications. For more information on products and distributor locations, visit www.accuride.com.

Accuride’s new color catalog, “Slides for Wood Furniture and Wood Cabinetry,” is now available.

Santa Fe Springs, CA—Accuride’s new color catalog, “Slides for Wood Furniture and Wood Cabinetry,” is now available. The completely redesigned, 36-page brochure offers an entirely new warm and friendly look that includes attractive images sure to spark creative application solutions. In addition, readers will find detailed product specifications and a helpful selection guide.

The products are organized into six different sections: Light Duty, Medium Duty, Heavy Duty, Media Hardware Collection, Flipper Door Slides®, and Specialty. Each section features a slide selection guide with a brief overview of the slides in that category. Detailed product descriptions include key specifications and special features.

Accuride International Inc. designs and manufactures precision ball bearing slide products for a broad variety of applications. For more information on products and distributor locations, visit the company’s web site at www.accuride.com.

Santa Fe Springs, CA-Accuride expands the 100-pound, full extension family of slides with the addition of the 3832 Touch Release and Heavy-Duty Touch Release. These products hold drawers or rollout shelves in a closed position until activated by touch. Pushing on the drawer front propels it open about 2 inches.

Designed to enhance residential and commercial installations, the 3832TR is well suited to portable cabinets or equipment for medical and educational environments. Model 3832HDTR has a stronger hold-in force built for more demanding applications such as RV or marine cabinetry.

The Touch Release products eliminate the need for drawer pulls, providing the aesthetics of simple, clean drawer fronts, while offering a good solution for those who have difficulty grasping drawer pulls. Drawer fronts without protruding pulls to collect dirt or entangle users also increase the safety and cleanliness of environments.

These products have a lever disconnect and Accuride’s signature cam drawer front adjustment. The 3832TR is available in even lengths 12 to 28 inches, with a choice of three finishes: clear zinc, black, and white.

Accuride manufactures precision ball bearing slides for a variety of applications and has five locations worldwide; each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit the company’s web site at www.accuride.com.

Santa Fe Springs, CA-Accuride announces the addition of the Quick Lift to their media hardware collection. The Quick Lift is a remote controlled, motorized assembly designed to carry flat-panel televisions in wood cabinetry. The lift rises for viewing or lowers to conceal screens when not in use.

Streamlined for quick installation, the Quick Lift is pre-wired and pre-mounted to a 3/4" thick backing board that is secured to the rear of the cabinet. Installation requires only standard tools.

The Quick Lift is compatible with most flat-panel television screens up to 50" diagonal and 33.5" tall. It has reinforced steel rails that offer strength and stability, supporting up to a 120-pound load.

The hole and slot pattern on the unit provides several options for bracket and television positioning. Built-in cable management keeps wires clear of the mechanism.

The Quick Lift gives cabinetmakers more design flexibility as it fits cabinet widths of 28" and greater. For cabinets constructed with a fixed lid, an optional bracket kit is available.

Accuride manufactures precision ball bearing slides for a variety of applications and has manufacturing locations worldwide; each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit www.accuride.com.

Santa Fe Springs, CA - Accuride announces the availability of new timesaving Production Packaging for slide models 3832 (lengths 10"-28" only), 3834 and 3732 (all lengths).

Production packaging is unique in that the slides are shipped with the drawer members disconnected from the cabinet members. The two types of members are packaged separately within the same box, which allows the drawer members to be distributed to a different area of the cabinet shop for installation. Cabinetmakers using 100 pairs of slides per month can save approximately one full day of labor per year with production packaging.

Accuride International manufactures precision ball bearing slide products for a broad range of applications. The company has five manufacturing locations worldwide; each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit www.accuride.com.

Santa Fe Springs, CA - Gather your pit crews and soup up that belt sander! Accuride announces the premier of the Belt Sander Racing Association (BRSA) with a special event planned for this summer’s AWFS®Fair in Las Vegas, Nevada, July 18 – July 21, 2007.

Accuride and the AWFS®Fair tradeshow committee have developed this event to bring together belt sander racing enthusiasts to have fun and compete for awards on a 12" wide, 75' long wooden track. First, second, and third place awards will be presented, along with special recognition given to entrants for Best Design Theme and Greatest Wipe Out.

“I don’t think attendees have ever seen anything like this; it is an incredible, exciting, and fun event. We believe that it is going to become a major AWFS®Fair attraction sponsored by Accuride for years to come,” said Accuride Western Regional Manager Jamie Goodwin and member of the 2007 AWFS®Fair Tradeshow Committee.

Complete rules and entry forms will be available soon at www.accuride.com.

The AWFS®Fair in Las Vegas combines the largest exhibition of woodworking hardware and machinery, board and panel products, upholstery material, wood components, supplies, services, and new technologies in North America with networking opportunities and a professional educational conference.

Accuride designs and manufactures precision ball bearing slide products for a variety of applications. The company has manufacturing locations worldwide: each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit www.accuride.com.

Santa Fe Springs, CA -Accuride announces new 6" and 8" lengths are now available in full extension Model 3832. These new lengths are ideal for small, decorative, yet functional box drawers commonly used in commercial casework, kitchens, hobby rooms, workbenches, and other applications. Model 3832 carries a 100-pound load rating and Accuride’s signature cam drawer adjust mechanism.

Accuride manufactures precision ball bearing slides for a variety of applications and has five locations worldwide; each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit the company’s web site at www.accuride.com.